Search Results for: steeplechase leggings in the saddle

Steeplechase Leggings – in the saddle!

I hope you’re not sick of seeing all my versions of my latest Steeplechase Leggings pattern yet, because these are the pair I’ve been most itching to show you!

Ever since I started designing something special for equestrians, I knew I wanted my niece, Megan, to be my athlete-model. I’ve sewn for her on and off as she’s grown up, but living so far away, it’s difficult to get accurate measurements before she goes and grows again! But my impromptu trip to the States in January meant I could measure her in person, and post them over in time for the pattern launch.

To refresh your memory, here’s the description:
These leggings have no inseams! Instead, a curved, outer seam runs from the back of the ankle up to the centre front, where it joins a separate yoke piece. There’s an optional, hidden back pocket, elasticated waistband, and your choice of three lengths: biker short, capri, or full length leggings.

Once I was back in London, I sent her the Funkifabrics url, let her pick whatever she wanted, and she chose the black and white Solar System print, which I think is a pretty mature choice for a tween!

I made her the full length leggings, and used the same fabric for the yoke and the body, though you can only barely see the yoke in these photos as she’s wearing a teeshirt over top. I thought that we’d be able to arrange photos much earlier so I could show you how these work in the saddle before the pattern release, but alas, there was another death in the family and the horrible East Coast weather also severely disrupted her Saddle Time.

But the upside is that you get to see photos of Megan riding her horse at the local stables in gorgeous sunshine, and in only a teeshirt on top, too! Since I made and posted these before I had any feedback from my pattern testers, though, you can see that the knees are a little baggy on her – this was a common issue with my testers and was adjusted for the final release version.

One of my pattern testers, Kelli, is a keen rider and gave me so much amazing feedback on the 5 (? or was it 6?) pairs she made during the 2 week testing period, that I really wish I could’ve applied those lessons to Megan’s pair, which was made before I knew!

Rouleur Leggings – in sequins, cats, and rainbows!

The problem with taking so long to develop each sewing pattern is that I end up making so many lovely versions that I can’t show you until months after I’ve made them! But it does mean that after a pattern is released, you get a glut of finished makes from me…

Today I want to show you three different versions of the Rouleur Leggings that I made for myself. I made TONS more to test the seaming, and fit, and how they performed on the bike and out on runs, but usually the bulk of these were made from cheap, stretchy fabric and I inevitably ended up drawing all over them in marker pen to annotate what changes I wanted to make. But these three were sewn more as samples than muslins, so I’m happy to share them with the world!

Steeplechase Shorts for an active tween

On Friday I showed you the full-length version of the Steeplechase Leggings pattern I made for my niece, Megan, but as soon as I finished making those, I decided to throw in a shorts version, too, so she can wear them in the warmer Virginia summers.

I’d measured her in person when I had to return to the States briefly in January, and I made and posted them over in time for the pattern launch. Since I’d already cut out her size (XS) for the longer leggings, the only difference I had to make for these was just to cut along the Biker Shorts hem line instead!

All together now, the pattern description is:
These leggings have no inseams! Instead, a curved, outer seam runs from the back of the ankle up to the centre front, where it joins a separate yoke piece. There’s an optional, hidden back pocket, elasticated waistband, and your choice of three lengths: biker short, capri, or full length leggings.

These were a little bonus gift, but I still wanted to make them stylish for her so she could wear them for play, sports, or school if she wanted, so the main fabric is the very last of my adored Eclipse “Hint of Mint” supplex (which you may remember from my Mint X Back Workout Top or my Multi-Print VNA Top), but I made the yoke from offcuts from my Animal Magic Steeplechase Leggings, which I was cutting out for myself at the same time. Like the afore-mentioned VNA Top, I really like the mix of the prints here even though they weren’t designed to go together.

I love how well these shorts stand up to all the movements a 12 year old can throw at them – running, jumping, diving at the football (soccer ball) – they aren’t shifting for anything!

Steeplechase Leggings – purple capris and shorts

So far I’ve shown you my two solid-coloured full length pairs of my latest Steeplechase Leggings pattern, but this pattern also comes in capri length or biker-short length options, too! So you can really wear these all year long, and the construction is exactly the same no matter what length you choose, which makes the instructions even more straight forward.

In case you missed the initial announcement, here’s the pattern description:
These leggings have no inseams! Instead, a curved, outer seam runs from the back of the ankle up to the centre front, where it joins a separate yoke piece. There’s an optional, hidden back pocket, elasticated waistband, and your choice of three lengths: biker short, capri, or full length leggings.

Here are the capri and shorts length versions I sewed up as samples. I tried to make these in more sedate colourways than my normal crazy prints! (Yes, only I would call bright purple “sedate”!)

I’m not usually a fan of capris, but I know so many people who love them that I always try to offer the length if at all possible. They can be a great transitional length when it’s too warm to wear full length leggings, but not quite warm enough for shorts.


(Seen here with my mustard merino wool Surf to Summit Top)

The fuchsia fabric used here is a super soft, comfortable wicking jersey with a brushed, navy back, which was gifted to me by a friend with industry connections (sorry!). I also got a biege colourway at the same time, and I’m looking forward to mixing it and the scraps leftover from this. The yoke is just a plain black supplex leftover in my stash.

Steeplechase Leggings – citron and sage pairs

Wow, thank you all so much for your orders and comments on my new Steeplechase Leggings pattern! The response has been phenomenal, so thank you!

In case you missed the initial announcement, here’s the description:
These leggings have no inseams! Instead, a curved, outer seam runs from the back of the ankle up to the centre front, where it joins a separate yoke piece. There’s an optional, hidden back pocket, elasticated waistband, and your choice of three lengths: biker short, capri, or full length leggings.

During the development process, I made so many samples pairs of these – beyond the initial early ones (not fit to be shown!), I made a whopping SIX pairs for myself, plus two more for my athlete-model niece, too.

Rather than overwhelm you with all the versions at once, I thought I’d start with the two pairs of full-length leggings I made in solid colours, as you can see the seamlines a bit more easily in these.

This first pair may be my favourite pair ever – made up in citron ex-New Balance supplex from FabricMart (now sold out) with a rainbow spaced-dyed supplex yoke. I’ve got enough of the citron left for another garment, but I’ve made so much with the rainbow before that I mostly just fit the yoke out of the scraps.


(it pairs so nicely with my ombre-print Fehrtrade x Laurie King VNA Top!)

These are just so comfortable, and you know how I love bright colours! I’ve done quite a few test runs in these, and they really help to liven up the cold, dark wintry nights.

Steeplechase Leggings – on sale now!

My Steeplechase Leggings pattern is finally available to buy! Yay!


How awesome is the cover illustration I commissioned from Lauren Cox? I wanted to change up the design a bit for 2015, so I got in touch with her and I created a back cover for the first time as well!

The official pattern description:
These leggings have no inseams! Instead, a curved, outer seam runs from the back of the ankle up to the centre front, where it joins a separate yoke piece. There’s an optional, hidden back pocket, elasticated waistband, and your choice of three lengths: biker short, capri, or full length leggings.

I am seriously SO excited to finally release this pattern – I’ve made up so many samples for myself (and my athlete-model niece) and I even ran a half marathon in a pair on Sunday, too! Even if you’ve never had problems with inner-leg chafing, you’ll suddenly wonder how you ever managed without these – they’re just so comfortable to wear!

And if you’re an equestrian, then you’re in luck, because these are great for riding, especially if you add a little bit of silicone grip to the inner knees – which I’ve marked on the pattern for you, because these pieces look weird! Seriously, get your “WTF face” ready when you look at these pattern pieces, because I guarantee they’re unlike anything you’ve seen before! But they’re still super quick to sew up – most of my pattern testers said they only took 2-3hrs to make, including piecing the pattern together!

Coming soon: the Steeplechase Leggings!

Let me just start by saying how excited I am about this design. As I hinted about months ago, it’s a concept that I’ve never seen done before, either in a sewing pattern nor in RTW – leggings with no inseam!

The idea was planted into my head by an equestrian student at one of my leggings classes, and it brewed in my head for a few months before I was ready to start developing it. First I started by just shifting the seam to the outside leg, at which point I could’ve just inserted a panel like I did with my Duathlon Shorts pattern. But since I’d already done that before, why not do something different and shift the seam to the back of the leg and add in some curves and a yoke panel, too??

Why not, indeed!

My official blurb is:
These leggings have no inseams! Instead, a curved, outer seam runs from the back of the ankle up to the centre front, where it joins a separate yoke piece. There’s an optional, hidden back pocket, elasticated waistband, and your choice of three lengths: biker short, capri, or full length leggings.

It’s particularly exciting for me because these bring a whole new sport into my pattern stable (ahem) – horseback riding! But they work equally well for running, cycling, and yoga, too, whether you’ve had problems with inner-leg chafing in the past or not. Despite the crazy concept and WTF pattern shapes, these are also deceptively easy to sew up, too – most of my testers made these in a single evening, from cutting to wearing!

These are available in my usual size range, and also come with the usual, fully illustrated instructions complete with Common Fit Alterations section, and Print at Copy Shop version included as standard.

I’ve sewn up SO many samples for myself over the past few weeks, and I’ve been testing them out on my river runs, and also on Tuesdays at Run dem Crew. Because it’s still quite chilly here in London, I’ve been mostly sewing the full-length leggings, but I’ve got (more sedate!) capri and biker short length versions ready to photoshoot this weekend, too.

I’ve still got lots to do before the release sometime next week, though – like going through all the feedback from my incredible band of pattern testers, creating the To Do list of tweaks and suggestions, coordinating the photoshoots of all my samples, plus some of my niece wearing her samples in the saddle (yay!), and finishing up the pattern covers, which I decided to change up a bit for 2015.